header_glue_1400x317px.jpg

MD GLUE Instant adhesive

There is no adhesive which can bond everything. Specific adhesives are necessary for various materials which are matched with them as regards their structural composition and in their viscosity.
MD GLUE instant adhesive by MARSTON-DOMSEL is supplied in practical bottles with droppers and is available in various versions for all kinds of materials.

  • Economical in use
  • Precise application possible
  • High impact resistance
  • Extremely high tensile strength
  • High temperature stability
  • Good water resistance for special types
  • Bonds in a few seconds
  • NSF Approval

Areas of application:

The electrical and electronics industries, engineering, metalworking, automotive construction, model construction, the furniture industry, plastics processing, dentistry, fingernail bonding, the rubber industry, the lighting industry etc.

our new     our specialists     our standards      remover

OUR NEW!

MD GLUE PREMIUM

The new MD PREMIUM GLUE is once again a result of our constant further developments in the area of cyanacrylate adhesive. With our new 3 types
MD PREMIUM GLUE we are expanding the wide range of rapid adhesives and thus the diverse areas of application.
MD BLITZSCHNELL

Despite its high viscosity, the adhesive is super fast and therefore also suitable for elastomers etc.

  •      Medium viscosity (approx. 250-300 mPa.s)
  •      Hand tight: approx. 1 - 10 seconds
  •      Temperature resistance: -40 ° C to +80 ° C
  •      Gap filling capacity: 0.15 mm

Item No. Bottle of 20 g MGL.BZ.F20 VE 12


MD RAPID SECURE

ultra fast and extremely tight
No blooming
  • universal application
  • curing time handling:    5 - 35 seconds    
  • temperatur resistance:    -40 to +80°C    
  • gap-filling:    0,15 mm 
  
Item No. Bottle of 20 g MGL.RS.F20 VE 12



 

MD GLUE DUPLEX

DUPLEX is characterised by the two different ways of curing –
through UV light or humidity.  Thus, even non-transparent materials can be transparently bonded free of errors. Excess adhesive can be hardened in 1–2 s. It can also be used as a casting mass.

  • medium viscosity
  • curing time handling: ca. 10 - 130 sec.
Item No. MGL.PD.F20 bottle 20 g unit 12
Item No. MGL.PD.T20 tube 20 g unit 12
Item No. MGL.PD.T5 tube 5 g unit 10
Item No. MGL.PD.F20-SET Set, bottle 20 g with beamer, UV lamp, battery, charger unit 1

 


Duplex-Set MGL.PD.F20-SET

MD GLUE HEAT


HEAT is a high-temperature adhesive that can be used in all areas in which high temperatures are required. In this temperature range (up to 150°C), permanently achieving a firm bond is a novelty.

  • medium viscosity
  • curing time handling: ca. 15 - 45 sec.

Item No. bottle 20 g MGL.PH.F20 unit 12


MD GLUE MOISTURE RESISTANT


Among other things, MOISTURE RESISTANT is moisture-resistant. Compared with a standard CA adhesive, it features excellent media resistance.

  • low viscosity
  • curing time handling: ca. 20 - 80 sec.

Item No. bottle 20 g MGL.PM.F20 unit 12


OUR SPECIALISTS!

MD GLUE XTREME

Die neue Generation Cyanacrylat-Klebstoff!

Neu entwickelte Produktionsmethode zur Verklebung unterschiedlichster Materialverbindungen (Metall, Gummi, Holz, Pappe, Keramik sowie die meisten Kunststoffe) mit- und untereinander. Trotz Restflexibilität erzielt MD GLUE XTREME sehr hohe Festigkeiten bei den meisten Werkstoffen.

Kein Ausblühen | Geruchlos | Keine Kennzeichnung | Bleibt flexibel | Hohe Temperaturbeständigkeit | Keine Beeinträchtigung elektronischer Bauteile | Sehr hohe Klebkraft | Top Schlagfestigkeit | Gute Feuchtigkeitsbeständigkeit

 Alle XTREME Kleber sind ISEGA zertifiziert (ISEGA Nr. 40680 U 15), kennzeichnungsfrei und NSF registriert.

isega_xtreme_rot.png
logo_kennzeichnungsfrei.png
NSF_logo_kreis.png
MD GLUE XTREME 1

  • low viscosity
  • color: transparent, colorless
  • temperature resistance from -50 to + 80°C
  • curing time handling approx. 5 - 90 sec

Item No. MGL.X1.ST12 unit 18 | Item No. MGL.X1.F25 unit 12

 

No. 151975
Category Code: P1

MD GLUE XTREME 2

  • medium viscosity
  • color: transparent, colorless
  • temperature resistance from -50 to + 80°C
  • curing time handling approx. 10 - 120 sec

Item No. MGL.X2.ST12 unit 18 | Item No. MGL.X2.F25 unit 12

 

No. 151975
Category Code: P1

MD GLUE XTREME 3

  • high viscosity 
  • color: transparent, colorless
  • temperature resistance from -50 to + 80°C
  • curing time handling approx. 10 - 120 sec


Item No. MGL.X3.ST12 unit 18 | Item No. MGL.X3.F25 unit 12

No. 151976
Category Code: P1

Displays für MD GLUE XTREME


For our new line of CA adhesive, we offer innovative metering options. Bottle with base 25 g or 12 g of the practical metering.

  • Avoids dripping
  • Needle valve
  • No clogging of the nozzle
  • Easy application of the adhesive
  • Precise dosing

We supply XTREME dispensing pens in the display: 12 g pens 18 pieces in the display 25 g pens 12 pieces in the display.

OUR STANDARDS







Our MD GLUES are delivered in printed displays.
mgl_glue_uebersicht.jpg

MD GLUE Overview

MD GLUE 100


For extremely rapid instant bonding of smooth plastic or rubber surfaces.

  • low viscous


Item No. bottle MGL.100.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1


MD GLUE 101.4062


For extremely rapid instant bonding of smooth plastic or rubber surfaces. Subsequent adjustment is no longer possible. Thin fluid with a capillary action.

  • low viscous


Item No. bottle MGL.101.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1


MD GLUE 111.495


For high-strength bonding of metals and plastic combinations. Universally applicable.

  • low viscous

Anwendung: Metall, Gummi, Kunsstoff, Glas, Leder


Item No. bottle MGL.111.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1
Item No. Smart tube MGL.111.TS4 unit 12

No. 151977
Category Code: P1

MD GLUE 150


For universal application with a wide variety of materials. Thick adhesive for leather, wood, cork, ceramics and all porous materials.

  • medium viscous

Google Übersetzer

Application: metal, plastic, rubber, EPDM elastomers, wood, glass / ceramics

Item No. bottle MGL.150.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1
Item No. cartridge 5 g MGL.150.PT5 unit 25 | bottle 20 g / blistercard MGL.150.F20-BK unit 10

No. 151977
Category Code: P1

MD GLUE 200


For bonding porous surfaces. Especially suitable for wood, rubber, ceramics, cork etc.

  • high viscous


Item No. bottle MGL.200.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1


MD GLUE 300


For bonding highly porous and uneven surfaces. Especially suitable for wood, leather etc.

  • high viscous


Item No. bottle MGL.300.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1

No. 151977
Category Code: P1

MD GLUE 310


For bonding metals, metal/rubber and metal/plastic combinations. Especially suitable for slightly uneven metal parts.

  • high viscous


Item No. bottle MGL.310.F20 unit 12 | F50 unit 20


MD GLUE PLUS 405


Impact-resistant, tensile-resistant, peel-resistant Six times more impact resistance and 10 times more peeling resistance than a conventional CA adhesive.

  • high viscous


Item No. bottle MGL.405.F20 unit 12 | F100 unit 12 | F500 unit 1

No. 151977
Category Code: P1

MD GLUE BS


Bonded quickly in just a second plastics and metals, and conbinations thereof. One of the best for EPDM.

  • low viscous


Item No. bottle MGL.BS.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1

No. 151977
Category Code: P1

MD GLUE BS100


For bonding rubber (EPDM), plastics, steel and metals. Bonds in 1 to 3 seconds.

  • medium viscous


Item No. bottle MGL.BS1.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1


MD GLUE BS Spezial


For bonding rubber, plastic, steel and other metals.

  • medium viscous

Item No. bottle MGL.BS-SP.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1

MD GLUE EL


Stays elastic! Remains flexible up to 180 °C. Suitable for rubber and rubber-plastic combinations.

  • low viscous

Item No. bottle MGL.EL.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1

MD GLUE FL

For transparent and translucent plastics. The bonded location leaves no white edge and does not effloresce..

  • medium viscous


Item No. bottle MGL.FL.F20 unit 12 | F50 unit 12


MD GLUE GA


Odourless CA adhesive. Suitable for polystyrene, acrylic glass and transparent materials. Does not effloresce.

  • medium viscous


Item No. bottle MGL.GA.F20 unit 12 | F50 unit 12


MD GLUE M


Methyl base. For rapid bonding of metals, metal/rubber and metal/plastic combinations.

  • low viscous


Item No. bottle MGL.M.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1


MD GLUE M1


For bonding metal and plastic combinations.

  • medium viscous



Item No. bottle MGL.M1.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1


MD GLUE / GEL 454


Spezial Sekundenkleber in thixotroper Form. Verläuft nicht, kann auch an vertikalen Stellen verarbeitet werden. Verklebung von Metall, Holz und Kunststoff.

  • Thixotrop


Item No. tube 3 g MGL.G.T3 unit 10 | tube 3 g/blister card MGL.G.T3-BK unit 12 | tube 20 g MGL.G.T20 unit 12


MD GLUE SQ


For fast bonding of plastic and rubber.

  • medium viscous


Item No. bottle MGL.SQ.F10 unit 25 | F20 unit 12 | F50 unit 12 | F500 unit 1


MD GLUE STYRO


Adhesive for polystyrene.

  • medium viscous


Item No. bottle MGL.ST.F20 unit 12 | F50 unit 12


MD GLUE SW4


Black impact-resistant instant adhesive. For bonding rubber and metals.

  • medium viscous


Item No. bottle MGL.SW4.F20 unit 12 | F50 unit 12


MD GLUE SW15


Black impact-resistant instant adhesive. For bonding rubber and metals. High temperature resistance up to 120 °C. Withstands vibration.

  • high viscous


Item No. bottle MGL.SW15.F20 unit 12 | F50 unit 12


MD MRM Remover


Entfernt Klebstoffreste von den Händen, aus Polstern, von Kunststoffen und vielen anderen Materialien (vor der Anwendung wird ein Materialtest empfohlen).
Einsatzgebiete:
Elektrik- und Elektroindustrie, Leuchtenindustrie, Metallverarbeitung, Automobilbau, Modellbau, Möbelindustrie u.v.a.

Art.-Nr. MRM.F20 Flasche á 20 ml VE 25 | Art.-Nr. MRM.F500  Flasche á 500 ml  VE 1  


Marston Domsel GmbH

Marston Domsel Klebstoffe und Dichtmittel

Your partner for sealing, adhesive, safety and fixing systems. Quality products Made in Germany.

Imprint/Legal Notice

Dealers

Contact

Bergheimer Str. 15

53909 Zülpich, Germany

+49 (0) 2252 94 15 0

info@marston-domsel.de

We will reply within 24 hours.

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.