-
High quality adhesive based on MS polymers. MD 2K MS Polymer, two-component MS polymer, is characterised by several special properties that set it apart from conventional sealants and adhesives. Here are some of the key features that make MD 2K MS Polymer so special: Two-component system: MD 2K...
- Type: Article
- Category: MD MS POLYMER EN
- Language: en-GB
-
Sealing compound and seam sealing in one. Article number/unit MMS.G.S450 grey, cartridge 450 g unit 12 MMS.S.S450 black, cartridge 450 g unit 12 MMS.W.S450 white, cartridge 450 g unit 12 MD MS Polymer - sprayable Properties: Elasticity: MS polymer offers high flexibility and stretchability,...
- Type: Article
- Category: MD MS POLYMER EN
- Language: en-GB
-
High temperature MS Polymer MD MS Polymer HT item number/unit MMS.HT.W, white cartridge 440 g unit 20 MMS.HT.G, gray cartridge 440 g unit 20 MMS.HT.S, black cartridge 440 g unit 20 product description data sheets MD MS POLYMER HT HIGH TEMPERATURE MS POLYMER Isocyanate and silicone-free Can be...
- Type: Article
- Category: MD MS POLYMER EN
- Language: en-GB
-
MD MS POLYMER | Marston Domsel GmbHhttps://www.marstondomsel.de/en/product/md-ms-polymer
High qualitiy adhesive. MD MS POLYMER - High-quality adhesive Free from isocyanate and silicone High-quality adhesive based on MS polymers Can be painted over and recoated Permanently elastic Can be applied wet on wet Resistant to weathering, salt water and chlorine Very good adhesion to many...
- Type: Article
- Category: MD MS POLYMER EN
- Language: en-GB
-
medium viscosity (ca.120 - 170 mPa.s) Article number/unit MGL.RS.F20, bottle 20 g unit 12 MGL.RS.F50, bottle 50 g unit 12 Technical data sheet Safety data sheet MD GLUE RAPID SECURE - Super fast - extreme strength The latest generation of cyanoacrylate adhesive! Viscosity: medium viscosity...
- Type: Article
- Category: OUR NEW!
- Language: en-GB
-
medium viscosity (ca. 300 - 375 mPa.s) Article number/unit MGL.BZ.F20, Bottle 20 g unit 12MGL.BZ.F50, Bottle 50 g unit 12 Technisches Datenblatt Sicherheitsdatenblatt MD GLUE BLITZSCHNELL Extremely fast and versatile! Our MD GLUE BLITZSCHNELL impresses with its high viscosity and yet impressive...
- Type: Article
- Category: OUR NEW!
- Language: en-GB
-
medium viscosity (ca. 90 - 230 mPa.s) MD GLUE DUPLEX medium viscosity (ca. 90 - 230 mPa.s) DUPLEX is characterised by the two different ways of curing – through UV light or humidity. Thus, even non-transparent materials can be transparently bonded free of errors. Excess adhesive can be hardened...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
MD REMOVER | Marston Domsel GmbHhttps://www.marstondomsel.de/en/product/md-mrm-remover
Remover MD REMOVER The MD Adhesive Remover from Marston-Domsel is a highly effective product that has been specially developed to effectively remove adhesive residues. It is ideal for use on a variety of surfaces including skin, upholstery, plastics and many other materials. However, it is...
- Type: Article
- Category: Glue Zubehör (EN)
- Language: en-GB
-
high viscosity (ca. 1500 mPa.s) MD GLUE SW15 high viscosity (ca. 1500 mPa.s) Properties: Black impact-resistant instant adhesive. For bonding rubber and metals. High temperature resistance up to 120°C. Withstands vibration. Temperature resistance from: -60°C to +120°C Curing time handling: 10 -...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
medium viscosity (ca. 500-1.000 mPa.s) MD GLUE SW4.480 medium viscosity (ca. 500-1.000 mPa.s) Properties: Black impact-resistant instant adhesive. For bonding rubber and metals. Temperature resistance from: -50°C to +120°C Curing time handling: 5 - 40 seconds Max. Gap filling capacity: 0.10 mm...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
medium viscosity (ca. 90-120 mPa.s) MD GLUE SQ.414 medium viscosity (ca. 90-120 mPa.s) Properties: For fast bonding of plastic and rubber. Temperature resistance from: -55°C to +80°C Curing time handling: 3 - 30 seconds Max. Gap filling capacity: 0.10 mm Article number/unit MGL.SQ.F10, bottle 10...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
thixotropic (ca. 50.000 mPa.s) MD GLUE / GEL 454 thixotropic (ca. 50.000 mPa.s) Properties: Special instant adhesive in thixotropic form. Does not run, can also be worked on vertical surfaces. Bonding of metal, wood and plastic. Temperature resistance from: -60°C to +80°C Curing time handling: 5...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
medium viscosity (ca. 90-120 mPa.s) MD GLUE M.493 low viscosity (ca. 10-30 mPa.s) Properties: Methyl-Base. For rapid bonding of smooth materials, metal/rubber and metal combinations. Temperature resistance from: -50°C to +80°C Curing time handling: 20 - 70 seconds Max. Gap filling capacity: 0.05...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
MD GLUE M - instant adhesive | Marston Domsel GmbHhttps://www.marstondomsel.de/en/product/md-glue-m
low viscosity (ca. 10-30 mPa.s) MD GLUE M.493 low viscosity (ca. 10-30 mPa.s) Properties: Methyl-Base. For rapid bonding of smooth materials, metal/rubber and metal combinations. Temperature resistance from: -50°C to +80°C Curing time handling: 20 - 70 seconds Max. Gap filling capacity: 0.05 mm...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
low viscosity (ca. 30 - 50 mPa.s) MD GLUE GA.460 low viscosity (ca. 30 - 50 mPa.s) Properties: Odourless CA adhesive. Suitable for polystyrene, acrylic glass and transparent materials. Does not effloresce. Temperature resistance from: -60°C to +80°C Curing time handling: 2 - 20 seconds Max. Gap...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
medium viscosity (90 -120 mPa.s) MD GLUE MGL.FL.403 medium viscosity (ca. 90-120 mPa.s) Properties: For transparent and translucent plastics. The bonded location leaves no white edge and does not effloresce. Temperature resistance from: -50°C to +80°C Curing time handling: 5 - 15 seconds Max. Gap...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
medium viscosity (ca. 90-120 mPa.s) MD GLUE EL.4850 medium viscosity (ca. 90-120 mPa.s) Properties: Remains elastic! Bendable up to 180°, for rubber and rubber/plastic combinations. Particularly suitable for O-rings and rubber parts that are subject to constant movement. Temperature resistance...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
low viscosity (ca. 15-25 mPa.s) MD GLUE BS-SP Spezial low viscosity (ca. 15-25 mPa.s) Properties: For bonding rubber, plastic, steel and other metals. Temperature resistance from: -50°C to +80°C Curing time handling: 2 - 10 seconds Max. Gap filling capacity: 0.05 mm Article number/unit...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
medium viscosity (ca. 100 mPa.s) MD GLUE BS100.401 medium viscosity (ca. 100 mPa.s) Properties: For bonding rubber (EPDM), plastics, steel and metals. Sticks within 1 - 3 seconds. Temperature resistance from: -60°C to +80°C Curing time handling: 2 - 10 seconds Max. Gap filling capacity: 0.07 mm...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
-
low viscosity (ca. 3-10 mPa.s) MD GLUE BS 406 low viscosity (ca. 3-10 mPa.s) Properties: For bonding rubber, plastic, steel, metals and EPDM. Bonds quickly. Temperature resistance from: -50°C to +80°C Curing time handling: 2 - 10 seconds Max. Gap filling capacity: 0.05 mm NSF Category Code: P1...
- Type: Article
- Category: OUR STANDARDS
- Language: en-GB
Contact
Do you have any questions about our products or
do you need technical support -
we will connect you to the right one
Contact Person.
You are also welcome to send us an email:
Dealers
Newsletter
You want to be constantly up to date
be informed of the latest news, then
Subscribe to our newsletter.
be informed of the latest news, then
Subscribe to our newsletter.
