MD GLUE EVO 3 - Cyanoacrylate adhesive | Marston Domsel GmbH

02 December 2020 high viscosity (ca. 1100 - 1500 mPa.s) MD GLUE EVOLUTION is a solvent-free adhesive specially developed for demanding applications where excellent performance properties are required. It offers excellent resistance to various environmental influences, high temperatures, ageing and a wide range of...

• Type: Article
• Category: OUR NEW!
• Language: en-GB

MD GLUE EVO 4 - Cyanoacrylate adhesive | Marston Domsel GmbH

02 December 2020 high viscosity (ca. 2.400 - 2.600 mPa.s) MD GLUE EVOLUTION is a solvent-free adhesive specially developed for demanding applications where excellent performance properties are required. It offers excellent resistance to various environmental influences, high temperatures, ageing and a wide range...

• Type: Article
• Category: OUR NEW!
• Language: en-GB

MD GLUE FL - instant adhesive | Marston Domsel GmbH

02 December 2020 medium viscosity (90 -120 mPa.s) MD GLUE MGL.FL.403 medium viscosity (ca. 90-120 mPa.s) Properties: For transparent and translucent plastics. The bonded location leaves no white edge and does not effloresce. Temperature resistance from: -50°C to +80°C Curing time handling: 5 - 15 seconds Max. Gap...

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD GLUE GA - instant adhesive | Marston Domsel GmbH

02 December 2020 low viscosity (ca. 30 - 50 mPa.s) MD GLUE GA.460 low viscosity (ca. 30 - 50 mPa.s) Properties: Odourless CA adhesive. Suitable for polystyrene, acrylic glass and transparent materials. Does not effloresce. Temperature resistance from: -60°C to +80°C Curing time handling: 2 - 20 seconds Max. Gap...

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD GLUE M - instant adhesive | Marston Domsel GmbH

02 December 2020 low viscosity (ca. 10-30 mPa.s) MD GLUE M.493 low viscosity (ca. 10-30 mPa.s) Properties: Methyl-Base. For rapid bonding of smooth materials, metal/rubber and metal combinations. Temperature resistance from: -50°C to +80°C Curing time handling: 20 - 70 seconds Max. Gap filling capacity: 0.05 mm...

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD GLUE M1 - instant adhesive | Marston Domsel GmbH

02 December 2020 medium viscosity (ca. 90-120 mPa.s) MD GLUE M.493 low viscosity (ca. 10-30 mPa.s) Properties: Methyl-Base. For rapid bonding of smooth materials, metal/rubber and metal combinations. Temperature resistance from: -50°C to +80°C Curing time handling: 20 - 70 seconds Max. Gap filling capacity: 0.05...

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD GLUE PLUS 405 - instant adhesive | Marston Domsel GmbH

02 December 2020 high viscosity (ca. 2.500-3.000 mPas) MD GLUE plus 405 high viscosity (ca. 2.500-3.000 mPa.s) Properties: Six times more impact resistance and ten times more peeling resistance than a conventional CA adhesive. Very high tensile shearing strength (240 kg per square centimetres with steel/steel)....

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD GLUE SQ - instant adhesive | Marston Domsel GmbH

02 December 2020 medium viscosity (ca. 90-120 mPa.s) MD GLUE SQ.414 medium viscosity (ca. 90-120 mPa.s) Properties: For fast bonding of plastic and rubber. Temperature resistance from: -55°C to +80°C Curing time handling: 3 - 30 seconds Max. Gap filling capacity: 0.10 mm Article number/unit MGL.SQ.F10, bottle 10...

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD GLUE SW15 - instant adhesive | Marston Domsel GmbH

02 December 2020 high viscosity (ca. 1500 mPa.s) MD GLUE SW15 high viscosity (ca. 1500 mPa.s) Properties: Black impact-resistant instant adhesive. For bonding rubber and metals. High temperature resistance up to 120°C. Withstands vibration. Temperature resistance from: -60°C to +120°C Curing time handling: 10 -...

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD GLUE SW4 - instant adhesive | Marston Domsel GmbH

02 December 2020 medium viscosity (ca. 500-1.000 mPa.s) MD GLUE SW4.480 medium viscosity (ca. 500-1.000 mPa.s) Properties: Black impact-resistant instant adhesive. For bonding rubber and metals. Temperature resistance from: -50°C to +120°C Curing time handling: 5 - 40 seconds Max. Gap filling capacity: 0.10 mm...

• Type: Article
• Category: OUR STANDARDS
• Language: en-GB

MD HARDENING ACCELERANT | Marston Domsel GmbH

02 December 2020 faster hardening of MD GLUE MD CURING ACCELERATOR The MD curing accelerator from MARSTON-DOMSEL is an innovative product that has been specially developed to significantly shorten the curing time of MD GLUE rapid adhesives. This accelerator is particularly effective when using rapid adhesives...

• Type: Article
• Category: Glue Zubehör (EN)
• Language: en-GB

MD MK 3000 - mounting adhesive | Marston Domsel GmbH

02 December 2020 Mounting adhesive with immediate initial adhesion MD MK 3000 mounting adhesive - The new generation with immediate initial adhesion The MD MK 3000 is an innovative assembly adhesive that impresses with its exceptionally high initial adhesion. It enables heavy parts to be bonded to vertical...

• Type: Article
• Category: Spezial Klebstoffe EN
• Language: en-GB

MD MS 2K POLYMER - adhesive | Marston Domsel GmbH

02 December 2020 High quality adhesive based on MS polymers. MD 2K MS Polymer, two-component MS polymer, is characterised by several special properties that set it apart from conventional sealants and adhesives. Here are some of the key features that make MD 2K MS Polymer so special: Two-component system: MD 2K...

• Type: Article
• Category: MD MS POLYMER EN
• Language: en-GB

MD MS POLYMER | Marston Domsel GmbH

02 December 2020 High qualitiy adhesive. MD MS POLYMER - High-quality adhesive Free from isocyanate and silicone High-quality adhesive based on MS polymers Can be painted over and recoated Permanently elastic Can be applied wet on wet Resistant to weathering, salt water and chlorine Very good adhesion to many...

• Type: Article
• Category: MD MS POLYMER EN
• Language: en-GB

MD MS POLYMER HT - High temperature MS POLYMER

02 December 2020 High temperature MS Polymer MD MS Polymer HT item number/unit MMS.HT.W, white cartridge 440 g unit 20 MMS.HT.G, gray cartridge 440 g unit 20 MMS.HT.S, black cartridge 440 g unit 20 product description data sheets MD MS POLYMER HT HIGH TEMPERATURE MS POLYMER Isocyanate and silicone-free Can be...

• Type: Article
• Category: MD MS POLYMER EN
• Language: en-GB

MD MS POLYMER sprayable | Marston Domsel GmbH

02 December 2020 Sealing compound and seam sealing in one. Article number/unit MMS.G.S450 grey, cartridge 450 g unit 12 MMS.S.S450 black, cartridge 450 g unit 12 MMS.W.S450 white, cartridge 450 g unit 12 MD MS Polymer - sprayable Properties: Elasticity: MS polymer offers high flexibility and stretchability,...

• Type: Article
• Category: MD MS POLYMER EN
• Language: en-GB

MD MS WINDSCREEN ADHESIVE | Marston Domsel GmbH

02 December 2020 Permanently elastic, moisture-curing one-component sealant and adhesive. Article number/unit MSK.K290, cartridge 290 g unit 12 MD MS Window Adhesive – High-Performance Sealant and Adhesive MS Window Adhesive is a permanently elastic, moisture-curing, single-component sealant and adhesive that has...

• Type: Article
• Category: Spezial Klebstoffe EN
• Language: en-GB

MD RAPID SECURE - instant adhesive | Marston Domsel GmbH

02 December 2020 medium viscosity (ca.120 - 170 mPa.s) Article number/unit MGL.RS.F20, bottle 20 g unit 12 MGL.RS.F50, bottle 50 g unit 12 Technical data sheet Safety data sheet MD GLUE RAPID SECURE - Super fast - extreme strength The latest generation of cyanoacrylate adhesive! Viscosity: medium viscosity...

• Type: Article
• Category: OUR NEW!
• Language: en-GB

MD REMOVER | Marston Domsel GmbH

02 December 2020 Remover MD REMOVER The MD Adhesive Remover from Marston-Domsel is a highly effective product that has been specially developed to effectively remove adhesive residues. It is ideal for use on a variety of surfaces including skin, upholstery, plastics and many other materials. However, it is...

• Type: Article
• Category: Glue Zubehör (EN)
• Language: en-GB

MD UV adhesives | Marston-Domsel GmbH

02 December 2020 MD UV adhesives react when exposed to UV light. MD UV adhesives react to UV light irradiation and cure in seconds. This innovative technology enables us to create clear and high-strength bonds between materials such as glass and metal. A major advantage of UV curing is the flexibility in choosing...

• Type: Article
• Category: UV-Kleber EN
• Language: en-GB