header_mss.jpg

MD srew retention

MD Srcew Retention is an extremely rapid anaerobic liqiud synthetic which cures on contact with metals without oxygen.

Screw retention replaces conventional fixing methods such as cotters, lock washers and discs. The screw retention secures screws, nuts and stud bolts against loosening due to vibrations and seals at the same time.

MARSTON-DOMSEL systems are functionally reliable even under the toughest conditions

  • High strengths
  • High temperature resistance (up to 230°C)
  • time and cost savings
  • very short hardening times
  • high functional reliability
  • DVGW

Areas of application:

Motor racing, engine construction, the automotive and motorcycle industries, tractor construction, the electrical industry, turbines and nuclear power stations, engineering, the lighting industry, transmission construction, the foodstuffs industry, gas and waterworks, pump construction, sanitary applications etc.

Application instructions:

Treat threaded parts with MD quick cleaner before applying screw retention adhesive. Pre-treat the surfaces with MD Activator No. 11 when working at temperatures below 5°C. Remove cutting oil and washing lye residues with hot water. Use MD MGL.BS or similar for plastic parts.

anaerobe_display.jpg

MSS.520.290

low viscosity- high strength- heavy demountable
Max. thread: M6
Gap filling: 0,07 mm
Breakaway: 15 -25 Nm
Fixture time: 10 - 20 minutes
Curing time-functional: 1 - 3 hours
Temperature resistance: -55°C to + 150°C
color: green
For recommended for the retroactive securing of bolts and screws. Capillary effect.
mss_button.jpg
MSS.541.241

low viscosity - medium strength - demountable
Max. thread: M12
Gap filling: 0,10 mm
Breakaway: 10 -15 Nm
Fixture time: 10-20 minutes
Curing time-functional: 1 - 3 hours
Temperature resistance: -55°C to + 150°C
Color: blue
anaerobe_uebersicht.jpg
Übersicht anaerobe Klebstoffe
MSS.550.222

medium viscosity - low strength - easy demountable
Max. thread: M24 | Gap filling: 0,10 mm
Breakaway: 4 - 8 Nm | Fixture time: 15 - 30 minutes
Curing time-functional: 1 - 3 hours | Temperature resistance: -55°C to + 150°C
color: purpur
Can be loosened again with normal tools. Suitable for adjusting screws, screws on maintenance openings and carburettor screws. For use on metals which may break during disassembly.
mss_anw.jpg
MSS.581.242

high viscosity - medium strength- demountable
Max. thread: M24
Gap filling: 0,20 mm
Breakaway: 15 -25 Nm
Fixture time: 10-20 minutes
Curing time-functional: 1 - 3 hours
Temperature resistance: -55°C to + 150°C
Color: blue
mss.581_blister.jpg

MSS.585.243

high viscosity - medium strength - demountable
Max. thread: M36 | Gap filling: 0,25 mm
Breakaway: 17 -22 Nm | Fixture time: 10 - 20 minutes
Curing time-functional: 1 - 3 hours | Temperature resistance: -55°C to + 150°C
Color: dark blue

For all metal threaded connections. Prevents breaking off due to vibration on drives, motors etc. Slightly oil-tolerant. The bond can be loosened again with normal tools.

dvgw.jpg
NG-5146AU7052
nsf.jpg
Listed P1
Reg. No. 154175
MSS.5850K.2400

without risk- and safety phrases

medium strength - high viscosity
For all screws with coarse threads up to M36 | Curing time-handling: 30-50 minutes
Curing time-functional: 6-12 hours| Gap filling: 0,25 mm
Viscosity: approx. 2.500 - 4.500 mPa.s | Temperature resistance: -55°C to +150°C
kennzeichnungsfrei
kennzeichnungs-
frei
wras.jpg
Zertifikat
1701532
MSS.587.245

high viscosity - medium strength - demountable
Max. thread: M80
Gap filling: 0,30 mm
Breakaway: 10 -15 Nm
Fixture time: 15-30 minutes
Curing time-functional: 1 - 3 hours
Temperature resistance: -55°C to + 150°C
Color: blue
MSS.641.270/1

medium viscosity - high strength - heavy demountable
Max. thread: M20 | Gap filling: 0,15 mm
Breakaway: 15 -20 Nm | Fixture time: 10 - 20 minutes
Curing time-functional: 1 - 3 hours | Temperature resistance:    -55°C to + 150°C
For all metal threaded connections including passive materials such as high-alloy steel. For highly vibration-and shock-resistant threaded connections e.g. studs on engines or pumps etc.
nsf.jpg
Listed P1
Reg. No. 154682
mss.641_blister.jpg
MSS.6410.2700K

without risk- and safety phrases

high strength - medium viscosity
For all screws with coarse threads up to M20 | Curing time-handling: 20-40 minutes | Curing time-functional: 6-12 hours | Gap filling: 0,15 mm |
Viscosity: approx. 550 - 850 mPa.s | Temperature resistance: -55°C to +150°C
MSS.642.272

high viscosity - high strength - heavy demountable
Max. thread: M36
Gap filling: 0,30 mm
Breakaway: 20 -35 Nm
Fixture time: 20-40 minutes
Curing time-functional: 3 - 6 hours
Temperature resistance: -55°C to + 230°C
Color: red
dvgw.jpg
NG-5146AT7033
MSS.681.262

high viscosity - high strength - heavy demountable
Max. thread: M36
Gap filling: 0,25 mm
Breakaway: 20 -25 Nm
Fixture time: 10-15 minutes
Curing time-functional: 1 - 3 hours
Temperature resistance: -55°C to + 150°C
Color: red
nsf.jpg
Listed P1
Reg.No. 154311

Packaging:
bottle                  10 g      unit 12 / display | pump dispenser    15 g      unit 12 / display
bottle                  50 g      unit 12 / display | pump dispenser    50 g      unit 12 / display
tube                    50 g      12 unit                  | tube                      100 g     unit 10
tube                  250 g       6 unit

mss_pumpdosierer.jpg

Marston Domsel GmbH

Marston Domsel Klebstoffe und Dichtmittel

Your partner for sealing, adhesive, safety and fixing systems. Quality products Made in Germany.

Imprint/Legal Notice

Dealers

Contact

Bergheimer Str. 15

53909 Zülpich, Germany

+49 (0) 2252 94 15 0

info@marston-domsel.de

We will reply within 24 hours.

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.