MD POLY 10:1
item number/unit
POLY 1:1 | MPE1
MPE.1.S50 50 g double cartridge unit 14
POLY 1:1 | MPE1
MPE.1.S50 50 g double cartridge unit 14
MD POLY 1:1
Two-component high-performance adhesive
MD POLY is a 2-part, 1:1 toughened acrylic adhesive
The product is in the ratio 10: 1 resin-hardener mixed.
Pot life approx. 5 minutes at +25°C
Curing time handling approx. 2 hours
Temperature resistance -40°C to +80°C
Final hardening approx. 24 hours
Processing temperature of +10°C to + 30°C
Two-component high-performance adhesive
MD POLY is a 2-part, 1:1 toughened acrylic adhesive
- Especially for PP, PE, Teflon
- Full cure at room temperature
- Bonds polyolefins
- No primer required
- Good impact strength
- Good chemical resistance
- Automatic adhesive gap through microparticles
The product is in the ratio 10: 1 resin-hardener mixed.
Pot life approx. 5 minutes at +25°C
Curing time handling approx. 2 hours
Temperature resistance -40°C to +80°C
Final hardening approx. 24 hours
Processing temperature of +10°C to + 30°C
POLY 1:1 | MPE 1
