header_polymer_1400x317px.jpg

MD MS POLYMER

is a high-quality MS Polymer-based adhesive.

  • Isocyanate and silicone-free
  • Can be painted over or coated
  • Permanently elastic
  • Applicable wet-on-wet
  • Resistant to UV radiation, weather, salt water and chlorine (transparent not UV resistant)
     
  • Excellent adhesion on many surfaces
  • Rapid hardening
  • Available in white, black, grey and transparent
  • Temperature-resistant from -40 to +100°C
  • (+130°C possible for short periods of 2-3 hours - except transparent)
  • Processing temperature +5 to +40°C


Areas of application:
Gluing metals, wood and plastics together and to each other in container construction, metalworking, apparatus engineering, air conditioning, yacht/boatbuilding, bodywork and vehicle construction, the elastic sealing of grooves and seams in areas where silicone cannot be used. (Silicone contamination when painting)

Item No. MMS.K290, gray                      unit 20 cartridges á 440 g 
Item No. MMS.K290-W, white               unit 20 cartridges á 440 g 
Item No. MMS.K290-S, black                 unit 20 cartridges á 440 g
Item No. MMS.K290-T, clear                  unit 20 cartridges á 300 g

Item No. MMS.W.T60, white                  unit 10 tubes á 60 g






New!
MS polymer in the bag 900 g with spout in the colors:

Item No. MMS.S.B600-B, black             unit 6 Beutel á 900 g
Item No. MMS.W.B600-B, white            unit 6 Beutel á 900 g
Item No. MMS.G.B600-B, gray               unit 6 Beutel á 900 g

mms_isega_2017.jpg

ISEGA Zertifikat
Nr. 47045U18

MD MS POLYMER HT

High temperature MS POLYMER

Application areas:
Tension-free structural bonding/stainless steel constructions. Bonding of metals, sheet metal working, apparatus construction, air conditioning, bodywork, and vehicle construction. High temperature resistance.

  • Isocyanate and silicone-free
  • Can be painted over or coated
  • Permanently elastic
  • Applicable wet-on-wet
  • Resistant to UV radiation, weather, salt water and chlorine
  • Excellent adhesion on many surfaces
  • Rapid hardening
  • Available in white, black, grey and clear
  • Temperature-resistant from -40°C to +100°C (+130°C possible for short periods of 2-3 hours)
  • Processing temperature +5°C to +40°C
  • Ideal for powder coating
  • Low shrinkage

Item No. MMS.HT.W, white            unit 20 cartridges á 440 g
Item No. MMS.HT.G, gray               unit 20 cartridges á 440 g
Item No. MMS.HT.S, black            unit 20 cartridges á 440 g


MD MS POLYMER SPRAYABLE

is sprayable sealant and seam sealer in one. Sprayable seam sealer for overlapping plates and welds in the original structure. Good adhesion to metals (zinc, aluminum, steel), primed and painted metal, wood materials, many duro-and thermoplastics. MD MS Polymer sprayable adheres to most substrates without priming and primer.

A product for two applications
  • Sound inhibitory effect
  • Solvent, isocyanate and silicone-free
  • Very good UV-resistance and aging stability
  • Spray and spreadable
  • Painted over immediately (wet-on-wet)
  • Permanently elastic after curing
  • Minimize the formation of cracks in the paint
  • Improved stone guard
  • Resistant to mechanical damage
  • Rapid skin formation
  • Vibration absorption
  • Silicone and isocyanates
  • Be spot welded in an uncured state

With a fast painting over the curing is not prevented but delayed.

Item No. MMS.G.S450   unit 12 cartridges á 450 g  


MD MS 2K POLYMER

is a high-quality MS Polymer-based adhesive

Resistant to UV, weather, water, damp and chlorine. MD MS 2K Polymer adheres extremely well to many surfaces in most cases without primer. Its temperature resistance range is between -40°C and +90°C. Shore A Hardness 40 DIN 53505. Complete hardening after four hours – conventional MS Polymer (3 mm) in 24 hours. Handling with standard silicone guns.

Item No. MMS.2K.G.S400, gray       unit 6 double cartridge á 500 g
Item No. MMS.2K.G, gray                unit 12 cartridge á 300 g
Item No. MMS.2K.S.S400, black      unit 6 double cartridge á 500 g
Item No. MMS.2K.S.S300, black      unit 12 cartridge á 300 g

NEW!
MD MS 2K SPEED POLYMER

Item No. MMS.2K.G.S25                unit 12 double cartridge á 35 g
Item No. MMS.2K.G.S50                unit 12 double cartridge á 65 g

MS 2K POLYMER gray
MS 2K POLYMER black

MD SMOOTHING AGENT „ULTIMATE“

Ready-to-use, environmentally friendly smoothing agent for modelling and for removing sealants.

MD SMOOTHING AGENT „ULTIMATE“ MD SMOOTHING AGENT „ULTIMATE“ is particularly suitable for modelling and for removing products based on silicone, MS or hybrid polymer and polyurethane. In compliance with the instructions of the technical bulletin, it can also be used on critical materials and natural stone.
MD SMOOTHING AGENT „ULTIMATE“ is used in numerous construction and industrial sectors for the smoothing of sealants based on silicone, MS or hybrid polymer and polyurethane.
Application:
Apply MD SMOOTHING AGENT „ULTIMATE“ to the sealant compound that is still fresh. Then shape the sealant with a suitable tool as desired. Remove excess smoothing agent as quickly as possible.
Replace smoothing agent if it is dirty, but at the latest at the end of a working day. Dirt dissolved in the smoothing agent can lead to staining on the sealant.
Only moisten sealant with smoothing agent, and remove excess smoothing agent immediately.
With horizontal joints, the smoothing agent must not accumulate in the dips of the joints (staining).
Caution with marble and similar surfaces, which can absorb smoothing agents (staining). Prevent it from flowing over such surfaces and clean them immediately after treating them with smoothing agent.
Storage:
Store in a cool and dry place. Protect from frost. Use up opened containers within 12 months.

Item No. MGM.F1000 Unit 12 bottles

MD PRIMER NR. 8


FOR POROUS SURFACES
Universal primer for porous surfaces, suitable for MD SIL silicon and MD MS Polymer. Easy to apply with a brush. Drying time 20-30 minutes.

Item No. MAC.P8.D250
Item No. MAC.P8.D1000

Marston Domsel GmbH

Marston Domsel Klebstoffe und Dichtmittel

Your partner for sealing, adhesive, safety and fixing systems. Quality products Made in Germany.

Imprint/Legal Notice

Dealers

Contact

Bergheimer Str. 15

53909 Zülpich, Germany

+49 (0) 2252 94 15 0

info@marston-domsel.de

We will reply within 24 hours.