Fastening Protection Sealants Surface treatment Adhesive

NSF DVGW label-free

MD anaerobes MD adhesives and sealants MD universal sealant MD 2K products MD special products MD MS polymer MD silicone MD GLUE

MD GLUE MD Silikon

Anaerobic adhesive socket and bearing fastening 610.603, viscosity: 100-150 mPas, gap filling capacity: 0.10, strength class: 3 New generation CA adhesive with very high and rapid increase in strength. Odorless and low blooming. No labeling required. Special granulate, hardens in connection with MD Glue BS in seconds. Anaerobic adhesive screw lock 5850K.2400, no labeling required, viscosity: 1,700-9,000 mPas, gap filling capacity: 0.25, strength class: 2 Especially for metals, higher viscosity. Readjustment possible. Use this stick, to quickly and simply patch and repair pipes and pipe bends, fittings and flanges, copper gutters and sheets, water heaters, water tanks, hot and cold water pipes, and freezing and air conditioning systems. extremely high final strength - 42 kg tensile strength cm2 Anaerobic adhesive socket and bearing fastening 630.641, viscosity: 500-700 mPas, gap filling capacity: 0.12, strength class: 2 Cures with humidity and under UV light. Odorless. Hardening accelerator for all MD Glue instant adhesives. Universal type for slightly rough surfaces. Fast hand strength. Transparent bonding and potting of acrylic, PETG, PC and much more. Anaerobic adhesive screw lock 587.245, viscosity: 6,000-20,000 mPas, gap filling capacity: 0.3, strength class: 2 High viscosity for leather, cork, wood and absorbent substrates. For fast, high-strength repair and bonding of metal parts, and for patching and sealing: cracks, holes, leaks and broken seals in machine parts; tanks and pipes; containers, pumps and housings; balcony railings and banisters; stripped threads. Pool | Swimming pool | Garden pond | Aquariums Anaerobic adhesive socket and bearing fastening 690.638, viscosity: 1,500-2,500 mPas, gap filling capacity: 0.2, strength class: 3 No labeling, low odor for sensitive components, no blooming. For smooth surfaces. Gel-shaped superglue for highly porous surfaces. Processing in vertical places possible. Remaining flexible high-performance adhesive with for the structural bonding of GRP, CFRP, ABS, PVC, PA, urethanes, aluminum, powder-coated metals, steel. Powder coating is possible. Anaerobic adhesive screw locking 641.270 / 1, viscosity: 400-700 mPas, gap filling capacity: 0.15, strength class: 3 Higher viscosity for e.g. wood to bridge smaller gaps. For repairing plastic parts and fibre-reinforced plastics, and bonding metal parts such as pipes and pipe bends, fittings and flanges, water tanks, pumps and housings with a seal that stays flexible. Anaerobic adhesive surface seal 2000.573, viscosity: 17,000 - 50,000 mPas, gap filling capacity: 0.3, strength class: 1 MS POOL FLEX can be used on or in swimming pools, garden ponds and aquariums. Adhesion, repairs and sealing to almost all surfaces underwater. Can come into direct contact with water and worked with underwater. Anaerobic adhesive pipe thread sealant 666.620, viscosity: 3,000-5,000 mPas, gap filling capacity: 0.25, strength class: 3 No labeling, low odor for sensitive components, no blooming, medium viscosity, universal. TÜV-tested windshield adhesive, 2-hour drive away time. For metals with slight roughness, universal for metal combinations. High-performance adhesive for the structural bonding of GRP, CFRP, ABS, PVC, PA, urethanes, aluminum, powder-coated metals, steel. Medium viscosity - for slightly porous substrates such as plastic and rubber. For fast, high-strength repair of wood and plastic parts, as well as for mending and sealing cracks and holes. Anaerobic adhesive surface sealant 3000.518, viscosity: 50,000 - 250,000 mPas, gap filling capacity: 0.5, strength class: 2 Controlled curing, takes one hour at any humidity for full-surface bonding of larger components, even with large adhesive gaps. Anaerobic adhesive pipe thread sealant 670.542, viscosity: 500-700 mPas, gap filling capacity: 0.15, strength class: 2 No labeling, low odor for sensitive components, no blooming. For porous surfaces. Extremely high initial adhesion for bonding metal, wood, plastic, glass, stone and much more for apparatus construction, air conditioning, exhibitions and shop fitting. For metals with a smooth surface, quick grip. High-performance adhesive for the structural bonding of GRP, CFRP, ABS, PVC, PA, urethanes, aluminum, powder-coated metals, steel. Anaerobic adhesive screw lock 6410K.2700, no labeling required, viscosity: 500 mPas, gap filling capacity: 0.15, strength class: 1 Universal - for smooth surfaces. Fast hand strength. Anaerobic adhesive surface sealant 4000.574, viscosity: 30,000 - 100,000 mPas, gap filling capacity: 0.5, strength class: 2 MD MS Polymer sprayable is used as sprayable seam sealant, for exact reproduction of OEM structures in engine compartments, on floor panels, and at overlapping joining seams, amongst other applications. Anaerobic adhesive pipe thread sealant 675.577, viscosity: 24,000-70,000 mPas, gap filling capacity: 0.5, strength class: 2 Good adhesion to a wide variety of substrates, suitable for a resilient, permanent seal. Suitable substrates: metals, primers and paints (two-component systems), ceramic materials, and plastics. Low-odor quick-release adhesive also for styrofoam. Transparent bonding and potting of plastic, glass, metal. Non-hardening universal sealant. For sealing housings, flanges, transmissions, pumps, water pumps, Cardan shafts, spur gear covers, oil pumps, control housings, axle covers with flat surfaces, etc. Easy removal Anaerobic adhesive screw locking 642.272, viscosity: 8,000-15,000 mPas, gap filling capacity: 0.3, strength class: 3 Universal - for smooth surfaces. Fast hand strength, especially with elastomers. Anaerobic adhesive surface sealant 5000.510, viscosity: 70,000 - 300,000 mPas, gap filling capacity: 0.5, strength class: 2 High temperature resistance for gluing and sealing of components before powder coating. For use in metal construction; container and apparatus construction; ventilation and air conditioning; bodywork, container, railway car and vehicle construction. Anaerobic adhesive pipe thread sealant 676.576, viscosity: 15,000-25,000 mPas, gap filling capacity: 0.25, strength class: 1 Removes adhesives from hands, upholstery, plastics and many other materials (a material test is recommended before use). Flexible adhesion for skirting boards, door sills, wall cladding, hardboard, insulation, panelling, windowsills, polystyrene, and many other uses. Low blooming adhesive for e.g. PMMA, chrome-plated metals. Structural adhesive to permanently bond low-energy plastics and elastomers such as PP, PE, POM and silicone without a primer. Solvent-free universal sealant, stays flexible. For sealing oil pumps, low-strength thread seals, vacuum systems, generators, bearing caps, and for metal-plastic seals. Vibration resistant. Anaerobic adhesive screw lock 681.262, viscosity: 3,000-6,000 mPas, gap filling capacity: 0.25, strength class: 2 Sealant MD MS Polymer is suitable for static and moving joints, both indoors and outdoors. For extremely rapid bonding of rubber and plastic. Readjustment is impossible. Metal/plastic. Resistant to petroleum products. Anaerobic adhesive pipe thread sealant 678.511, viscosity: 60,000-90,000 mPas, gap filling capacity: 0.3, strength class: 1 Fast-acting adhesive for elastomers that remains elastic. For repairing metal, plastic, fibre-reinforced plastic, ceramics, stone, or wood. Machine-workable. Hardening accelerator for all MD anaerobes. Universal sealant for many applications, e.g. roofs, walls, bathrooms. Use in vehicles to complement underbody protection and as a spreadable seam sealant. Specially made for use in building joints throughout the construction sector, e.g. on windows, doors and roofs, for seals in wood and metal structures, and for seals in the food sector. Anaerobic adhesive screw locking device 520.290, viscosity: 70-90 mPas, gap filling capacity: 0.07, strength class: 3 High viscosity, black CA adhesive with high temperature and impact resistance. 2-component instant adhesive especially for the metal processing. Acting capillary. Very fast hand strength, especially with plastics and elastomers such as Viton EPDM and much more. Liquid dowel for renovation, refurbishment, repair, filling, and gluing. For high-strength, permanently-elastic, and low-shrinkage connections. Room-temperature vulcanizing silicone sealant (RTV) for sealing oil pans, valve covers, flange connections, tanks, axles, etc. Creates waterproof seal for skylights, light domes, gutters, pipe junctions, wall connections, external chimney connections, outdoor ventilation, etc. Light-curing acrylate adhesive Anaerobic adhesive screw locking 541.241, viscosity: 100-150 mPas, gap filling capacity: 0.1, strength class: 2 Medium viscosity, black CA adhesive with high temperature and impact resistance. 2-component instant adhesive, cures in a controlled manner without moisture. High gap bridging. Medium viscosity, very fast adhering CA also suitable for leather. Bonding and repair of plastic parts, bumpers, headlight brackets, mouldings, side mirrors, seat shells, corners, rotor blades, and many other components. metallic effect - surface in 3D optics Easily seals balconies when applied beneath tiling, as well as waterproofing cracks and breaches in masonry. Light-curing acrylate adhesive in a DIY set of medium viscosity. 2-component flexible CA adhesive with an elongation at break of 200% after a short time. Odorless / label free. Anaerobic adhesive screw locking device 550.222, viscosity: 900-1,100 mPas, gap filling capacity: 0.2, strength class: 1 High temperature adhesive up to 135 ° C, high viscosity also for porous surfaces. For fast repairs and patches to cracks, leaks and broken seals; can also be used on damp and wet surfaces. High quality neutral-cure silicone sealant for sealing electronic components, metals, etc. No corrosion or damage to the components. Tension-free bonding and sealing for vehicle, body and container construction, for joints subject to stretching in metal work and ventilation system construction, sealing stainless steel basins and channels, for use on anodised aluminium, numerous painted