Article number/unit
MSP.KU.Y400 spray can 400 ml unit 12

MD Copper Spray
Acrylic-based copper protective coating

Product description:
MD Copper Spray is a weather-resistant, quick-drying coating that forms a durable, water-insoluble acrylic protective layer. It contains 99% pure copper particles, providing effective protection and enhancing the appearance of metal surfaces.

Advantages:
Surface sealing without additional treatment with clear varnish.
Protection of damaged areas.
High-purity copper particles for optimum appearance and protection.

Areas of application:
The Copper Spray is suitable for repairing damaged surfaces and for coating. It is ideal for enhancing the appearance and finishing of metal surfaces in industry, trade and crafts. It is also suitable for visually matching and repairing solder joints and damaged areas, for example on copper pipes.

Application instructions:
Use the can at temperatures between +5°C and +30°C; the optimum processing temperature is 20°C. The surface must be dry and free of grease and dust. Before first use, shake the can thoroughly for at least 2 minutes until the propellant and solvent mixture has completely combined with the paint and pigments. Well-shaken cans can be recognised by the ball impact marks on the bottom of the can. When spraying, hold the can upright and spray onto the surface from a distance of 20 to 30 cm in a criss-cross pattern. After use, clean the spray heads and, if necessary, clear them with a needle to ensure repeated use. Do not use or spray the can upside down to avoid loss of propellant gas. For commercial use only. Carry out tests in advance to check material compatibility and effectiveness.