MD MIX metal
MD MIX metal, blister card
item number/unit:
MIX.M.56 unit 24
MIX.M.56-BK blister card 56 g unit 10
MIX.M.115 115 g unit 12
MIX.M.56 unit 24
MIX.M.56-BK blister card 56 g unit 10
MIX.M.115 115 g unit 12
MD MIX METAL
For quick repairs of stripped threads, pumps, housings, tanks containers, hard plastic and stone.
MD MIX is easy to use. The material is worked like modelling clay. MD MIX has an extremely high Shore hardness D of 80 (concrete 60). MD MIX can be worked mechanically.
Working instructions:
The parts to be repaired have to be clean and free of oil and grease. Roughening increases the strength of the bond. Cut off the required quantity of MD MIX and knead it for approximately 2 minutes until an even color has been produced and the material becomes warm. Then apply MD MIX to the parts and mould it. Mechanical working can be done after approximately 20 minutes. Final hardening occurs after 24 hours. Do not work at outdoor temperatures below +5°C.
Application examples:
Repairing incorrectly drilled boreholes, holes in pipes, cavities and all cracks in metal, wood and plastic. Mechanical working is possible after a short time. Parts can be ground, milled, bored and painted over.
Technical data: MIX Metal
For quick repairs of stripped threads, pumps, housings, tanks containers, hard plastic and stone.
- Fills cracks and holes
- Temperature resistant up to +180°C and up to +300°C for short periods
- For on-the-spot repairs
MD MIX is easy to use. The material is worked like modelling clay. MD MIX has an extremely high Shore hardness D of 80 (concrete 60). MD MIX can be worked mechanically.
Working instructions:
The parts to be repaired have to be clean and free of oil and grease. Roughening increases the strength of the bond. Cut off the required quantity of MD MIX and knead it for approximately 2 minutes until an even color has been produced and the material becomes warm. Then apply MD MIX to the parts and mould it. Mechanical working can be done after approximately 20 minutes. Final hardening occurs after 24 hours. Do not work at outdoor temperatures below +5°C.
Application examples:
Repairing incorrectly drilled boreholes, holes in pipes, cavities and all cracks in metal, wood and plastic. Mechanical working is possible after a short time. Parts can be ground, milled, bored and painted over.
Technical data: MIX Metal
